banner_page

SN74LV138AD

16 Terminations2V~5.5V 16 Pin 74LV138 Signal switch74LV Series 8 Outputs1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV138AD
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 743
  • Description: 16 Terminations2V~5.5V 16 Pin 74LV138 Signal switch74LV Series 8 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74LV
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Decoder/Demultiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Decoder/Drivers
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Base Part Number 74LV138
Pin Count 16
Number of Outputs 8
Circuit 1 x 3:8
Polarity Inverting
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 1
Load Capacitance 50pF
Number of Bits 8
Propagation Delay 15 ns
Quiescent Current 20μA
Turn On Delay Time 26 ns
Family LV/LV-A/LVX/H
Logic Function Decoder, Demultiplexer
Number of Inputs 3
Current - Output High, Low 12mA 12mA
Supply Type Single
Bandwidth 70MHz
Power Supply Current-Max (ICC) 0.02mA
Voltage Supply Source Single Supply
Input Conditioning STANDARD
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LV138AD Overview


It is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.It is packaged in the way of Tube.The method digital switch ic adopts for mounting is Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.With the 74LV series, the multiplexers are suitable for a diverse range of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number 74LV138 that can be used to locate signal switch's related components as well.In this case, 2.5V is the voltage supplied to the multiplexer's system.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.The board has 16 pins configured.Surface Mount is the way it is mounted.I would like to refer to the logic switch as a member of the LV/LV-A/LVX/H family.There are 8 bits in signal multiplexer.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.The turn signal switch contains 8 outputs designed to operate.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.No external influence consumes 20μA current of multiplexer ic.There are 3 inputs provided in this multiplexer.For the normal operation of the device, 1 circuits must be formed.

SN74LV138AD Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single

SN74LV138AD Applications


There are a lot of Texas Instruments SN74LV138AD Signal Switches / Multiplexers / Decoders applications.

  • Code converters
  • Data bus control
  • Seven segment displays
  • Electronic circuits
  • RF-based home automation system
  • Home automation system
  • Make half adder
  • Injectors
  • Robotic vehicles
  • Telephone network

Write a review

Note: HTML is not translated!
    Bad           Good