Parameters |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
26 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
26 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
Decoder, Demultiplexer |
Number of Inputs |
3 |
Current - Output High, Low |
12mA 12mA |
Supply Type |
Single |
Bandwidth |
70MHz |
Power Supply Current-Max (ICC) |
0.02mA |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Subcategory |
Decoder/Drivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Base Part Number |
74LV138 |
Pin Count |
16 |
Number of Outputs |
8 |
Circuit |
1 x 3:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
1 |
SN74LV138ADR Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~5.5V.provides digital controlled switch's digital controlled switch'sSince they are members of the 74LV series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74LV138, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 2.5V volts.This turn signal switch has a total of 16 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 16 pin configuration.The mounting is in the way of Surface Mount.The logic switch is a member of the family of LV/LV-A/LVX/H.In this signal multiplexer, there are 8 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.The turn signal switch has 8 outputs designed for operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Despite not interacting with external factors, it consumes 20μA current of multiplexer ic.This multiplexer has a total of 3 inputs.The switches package is packaged in accordance with TR.It is necessary for the digitalswitch to operate normally that 1 circuits be formed.
SN74LV138ADR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
SN74LV138ADR Applications
There are a lot of Texas Instruments SN74LV138ADR Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Combinational circuit
- Data communication
- LVDS
- Code converters
- A/D converters
- Data bus control
- Relay
- Enabling different functions units in microprocessor instruction decoding
- Image transmission