SN74LV138APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 26 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 12mA 12mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Power Supply Current-Max (ICC) | 0.02mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV138APWR Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2V~5.5V provides digital controlled switch's superior flexibility for designers.As a member of 74LV series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.You can also find related parts by using its logic switch base part number of 74LV138.The multiplexer's system is supplied with a voltage of 2.5V.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the family of LV/LV-A/LVX/H.Signal multiplexer consists of 8 bits.Vsup should be kept at 2V to prevent some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.There are 8 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.It consumes 20μA current of multiplexer ic without external influences.A multiplexer such as this has 3 inputs available.TR is used to package the switches.To operate the digitalswitch normally, 1 circuits are formed.
SN74LV138APWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74LV138APWR Applications
There are a lot of Texas Instruments SN74LV138APWR Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Speed control of medern motors
- Signal router
- Transmission from the computer system of a satellite
- Data collection system
- Microprocessor memory systems
- PCIe
- Logic circuits
- Metal detectors
- To select different devices in microprocessor output
