SN74LV138ATPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LV138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 14 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 12mA 12mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Power Supply Current-Max (ICC) | 0.02mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV138ATPW Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.In this case, it is packaged as Tube.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~5.5V.provides digital controlled switch's digital controlled switch'sWith the 74LV series, the multiplexers are suitable for a diverse range of applications.As parts of its basic configuration, 16 terminations are desgined.You can also find related parts by using its logic switch base part number of 74LV138.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has 16 component pins.A conductor terminates at GULL WING.This supply type employs Single.Currently, it is configured with a 16 pin configuration.The mounting point is Surface Mount.The logic switch is a member of the family of LV/LV-A/LVX/H.As a result, signal multiplexer provides a total of 8 bits.In order for 5V to operate normally, a power supply is provided.There are 8 outputs designed for the operation of the turn signal switch.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.No external influence consumes 2μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer provides 3 inputs.In the mux switch configuration, there are 1 elements.
SN74LV138ATPW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74LV138ATPW Applications
There are a lot of Texas Instruments SN74LV138ATPW Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Memory chips
- To select different task for memory in microprocessor memory systems
- Frequency multiplexing system
- Data distribution
- Audio transmission
- Make half adder
- A robotic vehicle with the metal detector
- Injectors
- Used to connect a single source to multiple destinations
