Parameters |
Mount |
Surface Mount |
Package / Case |
VQFN |
Number of Pins |
16 |
Weight |
37.194574mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Decoder/Drivers |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Polarity |
Inverting |
Power Supplies |
5V |
Temperature Grade |
AUTOMOTIVE |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Propagation Delay |
13 ns |
Quiescent Current |
2μA |
Turn On Delay Time |
14 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
Decoder, Demultiplexer |
Supply Type |
Single |
Bandwidth |
70MHz |
Logic IC Type |
OTHER DECODER/DRIVER |
High Level Output Current |
-12mA |
Low Level Output Current |
12mA |
Number of Input Lines |
3 |
Number of Output Lines |
8 |
Input Conditioning |
STANDARD |
Length |
4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74LV138ATRGYRG4 Overview
Due to the lack of space on the board, digital switch is provided in the VQFN.Tape and Reel represents its packaging.There is a design for terminating 16 as part of its basic configuration.The multiplexer is supplied with 5V voltage.There are 16 component pins in this turn signal switch.Single is used as its supply type.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.The logic switch object belongs to the family of LV/LV-A/LVX/H.For mux switch's normal operation, there is a power supply provided at 5V.This is an the digital switch ic that is classified as Decoder/Drivers.No external influence consumes 2μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.For the purpose of accepting voltage levels, the multiplexers have 3 input lines.There are 8 output lines designed to serve as the source of the signal.At 125°C, the maximum operating temperature of this signal switch is acceptable.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Device specifications specify 5.5V as the maximum supply voltage for the signal switches.A minimum supply voltage of 4.5V is specified for the digital swith by its applicable specification.It contains 1 elements in mux switch configuration.As its logic IC, it uses OTHER DECODER/DRIVER.
SN74LV138ATRGYRG4 Features
Supplied in the VQFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
3 input lines
8 output lines
OTHER DECODER/DRIVER as the logic IC
SN74LV138ATRGYRG4 Applications
There are a lot of Texas Instruments SN74LV138ATRGYRG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Data-routing applications
- Paper plants
- Audio transmission
- Data bus control
- Decimal decoder
- Automation system
- Automatic Monitoring systems
- Night vision cameras
- Speed synchronization of multiple motors in industries