SN74LV139APWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 26.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| Max I(ol) | 0.006 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV139APWG4 Overview
Digital switch is provided in the TSSOP for the purpose of saving board space.The package is packaged in accordance with Rail/Tube.This configuration includes 16 terminations as part of its basic functionality.The multiplexer's system works with 2.5V voltage.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, conductors end at GULL WING.This supply type employs Single.The board has 16 pins configured.It is positioned in the direction of Surface Mount.The logic switch is a member of the LV/LV-A/LVX/H family.The power supply of 3.3V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as Decoder/Drivers.Without any external influences, it consumes 20μA current of multiplexer ic at all times.As the signal source, there are 4 output lines.Signal switch operation at 85°C temperature is acceptable.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Device specifications specify 5.5V as the maximum supply voltage for the signal switches.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2V.The mux switch configuration consists of 2 elements.It uses IC OTHER DECODER/DRIVER for its logic.
SN74LV139APWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 3.3V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74LV139APWG4 Applications
There are a lot of Texas Instruments SN74LV139APWG4 Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- Time division multiplexing system
- Encrypted communications system
- VGA
- Speed synchronization of multiple motors in industries
- Automation system
- Enabling different rows of memory depending on address in memory chips
- Make half adder
- PCIe
- Recording transmission
