SN74LV139APWR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 200mW |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 26.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 26.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 12mA 12mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74LV139APWR Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~5.5V voltage.Multiplexers of the 74LV series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74LV139, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 16 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.A configuration of 16 pins is used.It is mounted in the way of Surface Mount.The LV/LV-A/LVX/H family includes the logic switch.Signal multiplexer consists of 4 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.Keeping Vsup at 5.5V will prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 3.3V.The turn signal switch contains 4 outputs designed to operate.This is a signal switch that is categorized as Decoder/Drivers.It consumes 20μA current of multiplexer ic without external influences.The switches is packaged according to the way of TR.As a result of the operation of the digitalswitch, 2 circuits are formed.
SN74LV139APWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LV139APWR Applications
There are a lot of Texas Instruments SN74LV139APWR Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Robotic vehicles
- Make full adder
- CPU memory location identification
- Injectors
- GLAN
- Data bus control
- Microprocessor instruction decoding
- Medium scale TV wall
- Data transfer
