Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
41.900595mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Base Part Number |
74LV157 |
Pin Count |
16 |
Number of Outputs |
1 |
Circuit |
4 x 2:1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Number of Channels |
4 |
Load Capacitance |
50pF |
Power Dissipation |
200mW |
Number of Bits |
2 |
Throw Configuration |
DPST |
Propagation Delay |
19.5 ns |
Family |
LV/LV-A/LVX/H |
Number of Inputs |
8 |
Current - Output High, Low |
12mA 12mA |
Supply Type |
Single |
Bandwidth |
70MHz |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.2mm |
Length |
3.6mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV157ADGVR Overview
Providing this information in the 16-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 2V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74LV series, the multiplexers can be used for a wide range of applications.There are 16 terminations included in its basic configuration.There is a base part number 74LV157 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of LV/LV-A/LVX/H.As a result, signal multiplexer provides a total of 2 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.The turn signal switch operates with 1 outputs.It is provided with 8 inputs.The switches is packaged according to the way of TR.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN74LV157ADGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LV157ADGVR Applications
There are a lot of Texas Instruments SN74LV157ADGVR Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Image transmission
- Data distribution
- Video transmission
- Implementing boolean functions with multiple variables
- High-performance memory-decoding applications
- High-performance memory systems
- Electronics industry
- A/D converters
- Seven segment displays