banner_page

SN74LV157ADR

16 Terminations2V~5.5V 16 Pin 74LV157 Signal switch74LV Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV157ADR
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 232
  • Description: 16 Terminations2V~5.5V 16 Pin 74LV157 Signal switch74LV Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74LV
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Base Part Number 74LV157
Pin Count 16
Number of Outputs 1
Circuit 4 x 2:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 2V
Number of Channels 4
Load Capacitance 50pF
Power Dissipation 200mW
Number of Bits 2
Throw Configuration DPST
Propagation Delay 19.5 ns
Family LV/LV-A/LVX/H
Number of Inputs 8
Current - Output High, Low 12mA 12mA
Supply Type Single
Bandwidth 70MHz
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LV157ADR Overview


Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.Cut Tape (CT) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Multiplexer as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~5.5V, designers have superior flexibility.In addition to being a member of the 74LV series, these multiplexers have a wide range of applications.The basic configuration of this system includes 16 terminations.In addition, it also has a base part number of 74LV157, which can be used to find related parts.The multiplexer's system is powered by 2.5V volts.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the LV/LV-A/LVX/H family.As a result, signal multiplexer provides a total of 2 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.During mux switch's normal operation, 3.3V is provided with a power supply.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.The switches package is packaged in a way which is consistent with TR.This turn signal switch's circuit is based on a circuit with 4 channels.

SN74LV157ADR Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V

SN74LV157ADR Applications


There are a lot of Texas Instruments SN74LV157ADR Signal Switches / Multiplexers / Decoders applications.

  • Analog, digital or video signal switching
  • Home automation system
  • Telephone network
  • Microprocessor memory systems
  • Signal router
  • VGA
  • Speed control of medern motors
  • Relay
  • Data distribution
  • Logic circuits

Write a review

Note: HTML is not translated!
    Bad           Good