SN74LV157APW
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 19.5 ns |
| Quiescent Current | 20A |
| Turn On Delay Time | 18.8 ns |
| Family | LV/LV-A/LVX/H |
| Number of Inputs | 8 |
| Current - Output High, Low | 12mA 12mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74LV157APW Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in the manner of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~5.5V, designers are provided with a greater degree of flexibility.As a member of 74LV series, the multiplexers can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74LV157, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemIn this turn signal switch, there are 16 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.A configuration of 16 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the LV/LV-A/LVX/H family.In the signal multiplexer, there are 2 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.It is provided that 3.3V has a power supply in order to function normally.The turn signal switch has 1 outputs designed for operation.It consumes 20A current of multiplexer ic without external influences.It is provided with 8 inputs.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN74LV157APW Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LV157APW Applications
There are a lot of Texas Instruments SN74LV157APW Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- D/A converters
- Night vision cameras
- Arithmetic Logic Units
- To select different task for memory in microprocessor memory systems
- War field flying robot with a night vision flying camera
- Combinational circuit
- Telephone network
- HD surveillance system
- Analog to digital conversion
