SN74LV157APWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 19.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| High Level Output Current | 12mA |
| Low Level Output Current | 12mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV157APWRE4 Overview
For the purpose of saving board space, digital switch is included in the TSSOP.It is packaged according to the Tape & Reel (TR) method.Among its basic configurations are 16 terminations.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch contains 16 component pins.As the end of conductors, it uses GULL WING.The supply type of this multiplexer ic is Single.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the LV/LV-A/LVX/H family.There is a power supply provided for the mux switch's normal operation of 3.3V.This multiplexer has a total of 8 inputs.The switches package is packaged in accordance with the TAPE AND REEL method.On the multiplexers, 2 input lines are provided for accepting voltage levels.A signal source is provided by 1 output lines.Transmission is carried out over 4 channels in the turn signal switch's circuit.Signal switch operation at 85°C temperature is acceptable.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.It is specified that the signal switches should operate at 5.5V as its maximum supply voltage.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2V.
SN74LV157APWRE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
1 output lines
SN74LV157APWRE4 Applications
There are a lot of Texas Instruments SN74LV157APWRE4 Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Electronics industry
- High-performance memory systems
- Image transmission
- Small scale TV wall
- Code conversion
- Arithmetic Logic Units
- Data transfer
- Logic gates for other digital devices
- Night vision cameras
