SN74LV161ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV-A |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 220MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 27.5 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.02mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 95MHz |
| Timing | Synchronous |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV161ADBR Overview
The device is packaged in the 16-SSOP (0.209, 5.30mm Width)type. It is configured with 16terminations. Having a voltage supply of 2.5Vallows it to operate in a highly flexible manner. The device contains 1terminations. All component pins are equal to 16. Packaging is based on Cut Tape (CT). Circuit components are connected by 16pins. The way of Surface Mount is used to mount it. It is included in the LV/LV-A/LVX/Hfamily. Having been designed as a member of the 74LV-Aseries, it is well suited to a variety of applications. Binary Counteris selected as the logic type. It is recommended that the operating temperature be set to -40°C~85°C. Mounting type Surface Mountis used. Providing a supply voltage of 2V~5.5Vallows it to operate more reliably. The array contains elements containing 4bits each. Based on the Pbfree code, the result may be yes. An important feature of this electronic device is [0]. You can find more related parts under its base part number of 74LV161. It is packed with [0]. As a result of the voltage source, there is 3.3V voltage. In the case of the supply voltage (Vsup), it can be as low as 2V. Frequency 220MHzdetermines its operation. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.5V volts.
SN74LV161ADBR Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
4 bits per element
TCO OUTPUT
Frequency of 220MHz
SN74LV161ADBR Applications
There are a lot of Texas Instruments SN74LV161ADBR Counters & Dividers applications.
- Counter control/timers
- Up Counters
- counting/frequency sy nthesizers-BCD output
- Divide-by-N counting
- Analog multiplexing and demultiplexing
- SQUARING
- TRUE RMS-TO-DC CONVERSION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Fixed and programmable counters greater than 10
- Control counters
