SN74LV161ADR
| Parameters | |
|---|---|
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV-A |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 220MHz |
| Base Part Number | 74LV161 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 27.5 ns |
| Turn On Delay Time | 27.5 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.02mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 95MHz |
SN74LV161ADR Overview
This is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. 16 terminations are used for its configuration. As a result of the supply voltage of 0, 2.5Vcan operate in a fully flexible manner. The device has 1terminations. The number of all component pins is 16. In this case, it is packaged as Cut Tape (CT). There are 16 pins going on to connect other parts in the circuit. The way of Surface Mount is used to mount it. It is included in the LV/LV-A/LVX/Hfamily. Due to the fact that it is a member of the 74LV-Aseries, it has a wide range of applications. Binary Counteris selected as the logic type. -40°C~85°Cshould be the operating temperature. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array contains elements that store 4bits each. As far as Pbfree code is concerned, the result may be yes. It is important to note that TCO OUTPUTare really important features of this electronic device. Its base part number, [0], contains more related parts. Its packaging is provided by [0]. From the voltage source, there is a voltage of 3.3V volts. Supply voltage (Vsup) can be as low as 2V. With a frequency of [0], it operates. Typically, the supply voltage (Vsup) is limited to 5.5V.
SN74LV161ADR Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
TCO OUTPUT
Frequency of 220MHz
SN74LV161ADR Applications
There are a lot of Texas Instruments SN74LV161ADR Counters & Dividers applications.
- MULTIPLICATION
- Programmable decade counters
- TRUE RMS-TO-DC CONVERSION
- POWER COMPUTATION
- Time Out Timer for Consumer-Application Industrial Controls
- Counter control/timers
- Time delay circuits
- Up Counters
- Signal gating
- Timing applications
