SN74LV174ADRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 180MHz |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 12mA |
| Propagation Delay | 20.6 ns |
| Turn On Delay Time | 3 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 6 |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Power Supply Current-Max (ICC) | 0.02mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV174ADRG4 Overview
The package is in the form of SOIC. The element count is 1 . There are 16 terminations,The power source is powered by 2.5V. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. Electronic part Surface Mountis mounted in the way. A total of 16pins are provided on this board. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. As a result of its reliable performance, this T flip flop is suitable for TR. The D latch operates on 3.3V volts. It is set to -12mAfor the high level output current. In the low level output current setting, the current is set to 12mA. Ideally, the operating temperature should be lower than 85°C. Ideally, the operating temperature should be higher than -40°C. A minimum supply voltage of 2V is required for these RS flip flops to operate. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to achieve a frequency of 180MHz. D FLIP-FLOPis the logic IC it uses. There are 1 functions associated with the JK flip flop. 16pins are provided on the D latch. It offers maximum design flexibility with its output current of 12mA.
SN74LV174ADRG4 Features
16 pins
3.3V power supplies
1 Functions
16 pin count
SN74LV174ADRG4 Applications
There are a lot of Texas Instruments SN74LV174ADRG4 Flip Flops applications.
- Automotive
- Safety Clamp
- Convert a momentary switch to a toggle switch
- Circuit Design
- Common Clocks
- Test & Measurement
- Functionally equivalent to the MC10/100EL29
- Frequency Dividers
- Data transfer
- Supports Live Insertion
