SN74LV175ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Number of Bits | 4 |
| Clock Frequency | 165MHz |
| Propagation Delay | 23.3 ns |
| Turn On Delay Time | 3.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.4pF |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV175ADGVR Overview
16-TFSOP (0.173, 4.40mm Width)is the packaging method. The Tape & Reel (TR)package contains it. In the configuration, Differentialis used as the output. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74LVseries of FPGAs. In order for it to function properly, its output frequency should not exceed 165MHz. D latch consists of 1 elements. As a result, it consumes 20μA of quiescent current without being affected by external factors. Terminations are 16. The 74LV175family includes it. A voltage of 2.5V is used to power it. This T flip flop has a capacitance of 1.4pF farads at the input. This D flip flop belongs to the family of LV/LV-A/LVX/H. Electronic part Surface Mountis mounted in the way. 16pins are included in its design. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 4bits. 5.5Vis the maximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. In order to achieve its superior flexibility, 4 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch runs on a voltage of 3.3V volts. This T flip flop features a maximum design flexibility due to its output current of 12mA. It is designed with 2 output lines.
SN74LV175ADGVR Features
Tape & Reel (TR) package
74LV series
16 pins
4 Bits
3.3V power supplies
SN74LV175ADGVR Applications
There are a lot of Texas Instruments SN74LV175ADGVR Flip Flops applications.
- Clock pulse
- Event Detectors
- Functionally equivalent to the MC10/100EL29
- Individual Asynchronous Resets
- Differential Individual
- EMI reduction circuitry
- Supports Live Insertion
- Synchronous counter
- Buffered Clock
- Parallel data storage
