SN74LV273ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 205MHz |
| Propagation Delay | 22.1 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV273ADBR Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. There is an embedded version in the package Cut Tape (CT). Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. -40°C~125°C TAis the operating temperature. This logic flip flop is classified as type D-Type. The 74LVseries comprises this type of FPGA. Its output frequency should not exceed 205MHz. The list contains 1 elements. There is a consumption of 20μAof quiescent energy. Terminations are 20. You can search similar parts based on 74LV273. An input voltage of 2.5Vpowers the D latch. The input capacitance of this T flip flop is 2pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic component mounted in the way of Surface Mount. This board has 20 pins. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. It is designed with 8bits. As soon as 5.5Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A total of 3.3V power supplies are needed to run it. Featuring the maximum design flexibility, it has an output current of 12mA . It has 2lines.
SN74LV273ADBR Features
Cut Tape (CT) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV273ADBR Applications
There are a lot of Texas Instruments SN74LV273ADBR Flip Flops applications.
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
- CMOS Process
- Supports Live Insertion
- Computers
- Common Clocks
- Parallel data storage
- Count Modes
- Registers
- Event Detectors
