SN74LV273ADBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 22.1 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV273ADBRG4 Overview
The package is in the form of 20-SSOP (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~125°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74LV series. This D flip flop should not have a frequency greater than 160MHz. A total of 1 elements are present. It consumes 20μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. You can search similar parts based on 74LV273. The D flip flop is powered by a voltage of 2.5V . The input capacitance of this T flip flop is 2pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of LV/LV-A/LVX/H. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The flip flop is designed with 8bits. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2V for normal operation. Considering its reliability, this T flip flop is well suited for TR. The system runs on a power supply of 3.3V watts. The 12mA output current allows it to be designed with the greatest amount of flexibility. Currently, there are 8 lines of input.
SN74LV273ADBRG4 Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV273ADBRG4 Applications
There are a lot of Texas Instruments SN74LV273ADBRG4 Flip Flops applications.
- Shift registers
- Test & Measurement
- High Performance Logic for test systems
- Instrumentation
- Count Modes
- Parallel data storage
- Computers
- Shift Registers
- Buffer registers
- Modulo – n – counter
