SN74LV273ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LV273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 25.5 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV273ADGVR Overview
20-TFSOP (0.173, 4.40mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. The operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. The 74LVseries comprises this type of FPGA. Its output frequency should not exceed 160MHz. The list contains 1 elements. T flip flop consumes 20μA quiescent energy. 20terminations have occurred. The 74LV273 family contains this object. It is powered by a voltage of 2.5V . JK flip flop input capacitance is 2pF farads. The electronic device belongs to the LV/LV-A/LVX/Hfamily. Electronic part Surface Mountis mounted in the way. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its flexibility is enhanced by 8 circuits. Due to its reliability, this T flip flop is well suited for TR. It runs on 3.3Vvolts of power. The 12mA output current allows it to be designed with the greatest amount of flexibility. This input has 2lines.
SN74LV273ADGVR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV273ADGVR Applications
There are a lot of Texas Instruments SN74LV273ADGVR Flip Flops applications.
- High Performance Logic for test systems
- Latch
- Single Up Count-Control Line
- Synchronous counter
- Frequency division
- Load Control
- Clock pulse
- Memory
- Digital electronics systems
- Individual Asynchronous Resets
