Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
156.687814mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74LV373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Propagation Delay |
22 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
1 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
16mA 16mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Number of Input Lines |
2 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2mm |
Length |
7.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV373ADBR Overview
There is an embedded version of it in package 20-SSOP (0.209, 5.30mm Width). Cut Tape (CT) is the packaging method. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 2V~5.5V. The temperature at which the machine is operating is -40°C~85°C. An FPGA in this series belongs to the 74LV family. With this electronic part, there are 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74LV373 is its family. In order to function, the supply voltage should be set to 2.5V. The 20 pind are equipped with it. This electronic device is categorized as a LV/LV-A/LVX/H electronic device. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. In the subcategory FF/Latches, this part belongs. The maximal supply voltage (Vsup) reaches 5.5V. A total of 3.3V power supplies are needed to run it. (Vsup) should be greater than 2V. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is appropriate for TR. The output current of 16mA makes it feature maximum design flexibility. As far as external factors are concerned, it consumes 20μA of quiescent current without getting affected by them. The superior flexibility of this circuit can be attributed to the use of 8 circuits.
SN74LV373ADBR Features
20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
SN74LV373ADBR Applications
There are a lot of Texas Instruments SN74LV373ADBR Latches applications.
- Storage
- Audio and video switching
- Serial Output Register
- Buffer/Storage Registers
- Motor Drives
- Parallel Output
- Communication systems
- Phase comparator
- Four-bit storage with output enable
- Automotive HEV/EV Powertrain