Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
60.186038mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74LV373 |
Pin Count |
20 |
Output Type |
Tri-State |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Propagation Delay |
22 ns |
Turn On Delay Time |
1 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
16mA 16mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.02mA |
Number of Output Lines |
8 |
Count Direction |
UNIDIRECTIONAL |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV373ADGVR Overview
The 20-TFSOP (0.173, 4.40mm Width) package contains it. The package is in the form of Tape & Reel (TR). Tri-State is used for the output it is configured with. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. The 74LV series is associated with this FPGA. The electronic part in this image has 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74LV373 family, it falls under that category. It operates with a supply voltage of 2.5V. 20 pins are included. LV/LV-A/LVX/H is the family name of this electronic device. It is designed with 20 pins. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 3.3V power supplies required for this machine to operate. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Based on its reliable performance, this device is suitable for TR. The output current of 16mA makes it feature maximum design flexibility. There are 8 output lines that correspond to the binary equivalents of the input line. It consists of 1 elements. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.02mA is needed for operation.
SN74LV373ADGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373ADGVR Applications
There are a lot of Texas Instruments SN74LV373ADGVR Latches applications.
- Relay
- General-Purpose Register
- Watches
- Automotive ADAS
- Shift register
- Display driver
- Parallel data synchronization
- OC-48 communication systems
- Multi-line decoders
- Display