SN74LV373ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 22 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV373ADWR Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. The package is in the form of Tape & Reel (TR). It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. It operates at a voltage of 2V~5.5V. The temperature at which the machine is operating is -40°C~85°C. An FPGA in this series belongs to the 74LV family. The design of this electronic part contains 8 bits. A device such as this has 20 terminations designed. The family 74LV373 includes it. It operates with a supply voltage of 2.5V. The 20 pind are equipped with it. In terms of electronic devices, this one is in the LV/LV-A/LVX/H family. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.5V. There is 3.3V power supply for it. There should be a voltage supply (Vsup) greater than 2V. The reliability of this device makes it well suited to TR. With an output current of 16mA, it is highly flexible in terms of design. It follows that 8 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 20μA of quiescent current. This object is composed of 1 elements. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.02mA.
SN74LV373ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373ADWR Applications
There are a lot of Texas Instruments SN74LV373ADWR Latches applications.
- Hammer
- Four-bit storage with output enable
- Serial Output Data Queuing
- Up/down difference counting
- Buffer Storage
- Counter control
- Automotive ADAS
- Lamp and Display (LED)
- Control circuits
- Registers
