SN74LV373AIPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV373AIPWRG4Q1 Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the way in which it is packaged. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. A 2V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. An FPGA in this series belongs to the Automotive, AEC-Q100, 74LV family. The design of this electronic part contains 8 bits. In this device, there are 20 terminations that have been designed. As a member of the 74LV373 family, it falls under that category. With a supply voltage of 2.5V, it operates. It has 20 pins that makes it easy to use. This electronic device is categorized as a LV/LV-A/LVX/H electronic device. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. In this device, there are 2 ports. Subcategory FF/Latches includes this part. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. The device is powered by 3.3V power supplies. It is recommended that the supply voltage (Vsup) be greater than 2V. The device's reliable performance makes it a good choice for TR. It follows that 8 output lines are generated from the binary equivalent of the input line. A total of 1 elements make up this object. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.02mA.
SN74LV373AIPWRG4Q1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373AIPWRG4Q1 Applications
There are a lot of Texas Instruments SN74LV373AIPWRG4Q1 Latches applications.
- Display driver
- Flip-flops
- Serial Output Data Queuing
- Relay
- Instrumentation
- Shift right register
- Pseudo-random code generators
- Parallel data storage
- Counter control
- Bus system register with enable parallel lines at bus side
