Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74LV373 |
Pin Count |
20 |
Output Type |
Tri-State |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Propagation Delay |
22 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
1 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
16mA 16mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.02mA |
Number of Output Lines |
8 |
Count Direction |
UNIDIRECTIONAL |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV373APW Overview
A package called 20-TSSOP (0.173, 4.40mm Width) contains it. Tube is the way it is packaged. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. An FPGA of this type belongs to the 74LV series. With this electronic part, there are 8 bits. In this device, there are 20 terminations. The family in which it belongs to is 74LV373. It operates with a supply voltage of 2.5V. 20 pins are provided. It is a member of the LV/LV-A/LVX/H family of electronic devices. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. This part is included in FF/Latches. During this period, the maximum supply voltage (Vsup) reaches 5.5V. A total of 3.3V power supplies are needed to run it. A voltage greater than 2V must be supplied as a power supply (Vsup). The 16mA output current gives it maximum design flexibility. 8 output lines provide binary equivalents of input lines. The current consumed by the device is 20μA volts in quiescent mode, which cannot be affected by external factors. The element count is 1. Its maximum current supply (ICC) reaches 0.02mA.
SN74LV373APW Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373APW Applications
There are a lot of Texas Instruments SN74LV373APW Latches applications.
- Network Switches
- Counting
- Control circuits
- Automotive Infotainment
- Shift left register
- A/D and D/A conversion
- Multi-line decoders
- Communication systems
- Parallel-to-Serial Data Conversion
- Display