banner_page

SN74LV373APWG4

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV373APWG4
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 134
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Base Part Number 74LV373
Pin Count 20
Output Type Tri-State
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 16mA
Number of Bits 8
Propagation Delay 22 ns
Turn On Delay Time 1 ns
Family LV/LV-A/LVX/H
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 16mA 16mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.02mA
Number of Output Lines 8
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74LV
JESD-609 Code e4

SN74LV373APWG4 Overview


In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. It is packaged in the way of Tube. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. The 74LV series contains FPGAs of this type. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. The family it belongs to is 74LV373. The device works with a voltage of 2.5V for its supply voltage. It has 20 pins that makes it easy to use. It is a member of the LV/LV-A/LVX/H family of electronic devices. The device has 20 pins. The electronic part is mounted using the Surface Mount method. This device has a total of 2 ports. Subcategory FF/Latches includes this part. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. The device is powered by 3.3V power supplies. A supply voltage (Vsup) greater than 2V is required. The output current of 16mA makes it feature maximum design flexibility. Input lines are converted into binary equivalents by 8 output lines. It consists of 1 elements. Its maximum current supply (ICC) reaches 0.02mA.

SN74LV373APWG4 Features


20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements

SN74LV373APWG4 Applications


There are a lot of Texas Instruments SN74LV373APWG4 Latches applications.

  • Watches
  • Shift Registers
  • Data acquisition
  • Automotive HEV/EV Powertrain
  • Parallel data synchronization
  • Parallel Input
  • Flip-flops
  • Pattern Generators
  • Parallel-to-Serial Data Conversion
  • Parallel Input

Write a review

Note: HTML is not translated!
    Bad           Good