banner_page

SN74LV373APWR

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV373APWR
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 914
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74LV
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Base Part Number 74LV373
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 16mA
Number of Bits 8
Propagation Delay 22 ns
Quiescent Current 20μA
Turn On Delay Time 1 ns
Family LV/LV-A/LVX/H
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 16mA 16mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Number of Input Lines 2
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LV373APWR Overview


20-TSSOP (0.173, 4.40mm Width) contains it. As a result, it has a packaging of Cut Tape (CT). It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. It operates at a voltage of 2V~5.5V. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74LV series. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74LV373. The device works with a voltage of 2.5V for its supply voltage. It has 20 pins that makes it easy to use. This electronic device belongs to the family of LV/LV-A/LVX/H. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. It belongs to the subcategory of FF/Latches. 5.5V is the maximum supply voltage (Vsup). There is 3.3V power supply for it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. There are electronic circuits attached to the 2 input lines. Based on its reliable performance, this device is suitable for TR. As the output current is 16mA, the design flexibility is maximum. Aquiescent current is consumed by 20μA without being affected by external forces. The superior flexibility of this circuit can be attributed to the use of 8 circuits.

SN74LV373APWR Features


20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies

SN74LV373APWR Applications


There are a lot of Texas Instruments SN74LV373APWR Latches applications.

  • Control circuits
  • Shift Registers
  • OC-48 communication systems
  • Serial Input
  • Pseudo-random code generators
  • Buffer Storage
  • Avionics
  • Counter
  • Stacked or Push-Down Registers
  • A/D and D/A conversion

Write a review

Note: HTML is not translated!
    Bad           Good