Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LV373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Propagation Delay |
9.2 ns |
Turn On Delay Time |
1 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
16mA 16mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.02mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV373APWRE4 Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. The operating temperature is -40°C~85°C. The 74LV series contains FPGAs of this type. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74LV373 is the family name of it. With the supply voltage set at 2.5V, it is able to operate. With 20 pins, it is equipped. This electronic device is categorized as a LV/LV-A/LVX/H electronic device. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports. Subcategory FF/Latches contains this part. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 3.3V power supplies are required for it to operate. The supply voltage (Vsup) should be greater than 2V. There are 8 input lines in which electronic circuits are present. Based on its reliable performance, this device is appropriate for TR. With an output current of 16mA, it is highly flexible in terms of design. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.02mA is needed for operation.
SN74LV373APWRE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
SN74LV373APWRE4 Applications
There are a lot of Texas Instruments SN74LV373APWRE4 Latches applications.
- Automotive Infotainment
- Buffer/Storage Registers
- Parallel data storage
- Bus system register with enable parallel lines at bus side
- Frequency
- Flip-flops
- Counter control
- General-Purpose Register
- Shift left register
- Up-Down Johnson