SN74LV373APWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV373APWT Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Packaged in the way of Tape & Reel (TR). Tri-State is used for the output it is configured with. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. This device has 20 terminations. 74LV373 is the family name of it. With the supply voltage set at 2.5V, it is able to operate. 20 pins are provided. It is part of the family of electronic devices called LV/LV-A/LVX/H. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. The part belongs to the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. There are 3.3V power supplies attached to it. It is recommended to have a higher supply voltage (Vsup) than 2V. Electronic circuits are represented by 8 input lines. Based on its reliable performance, this device is well suited to TR. Its output current of 16mA ensures maximum design flexibility. The maximal power current (ICC) supplied for its operation reaches 0.02mA.
SN74LV373APWT Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
SN74LV373APWT Applications
There are a lot of Texas Instruments SN74LV373APWT Latches applications.
- A/D converters
- Buffer/Storage Registers
- Relay replacement
- Parallel data storage
- Frequency dividing
- Avionics
- Ring counter
- Multistage ripple counting
- Up-Down Johnson
- Decade counting 7-segment decimal display
