Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-VFQFN Exposed Pad |
Number of Pins |
20 |
Weight |
43.006227mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74LV373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Propagation Delay |
22 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
1 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
16mA 16mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW |
Number of Input Lines |
2 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
1mm |
Length |
4.5mm |
Width |
3.5mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV373ARGYR Overview
20-VFQFN Exposed Pad contains it. The package is in the form of Cut Tape (CT). There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A 2V~5.5V voltage supply is required for operation. The temperature at which the machine is operating is -40°C~85°C. An FPGA of this type belongs to the 74LV series. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. There is no doubt that it belongs to the family 74LV373. In order to function, the supply voltage should be set to 2.5V. 20 pins are included. In the world of electronics, this electronic device belongs to the family of LV/LV-A/LVX/H. 20 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports that can be connected to it. Subcategory FF/Latches contains this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. There is 3.3V power supply for it. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. In the circuit, there are 2 input lines that are constituted by an electronic circuit. As a result of its reliable performance, it is well suited for TR. With 16mA, maximum design flexibility is ensured. It consumes 20μA of quiescent current without being affected by external factors. To achieve its exceptional flexibility, it relies on 8 circuits.
SN74LV373ARGYR Features
20-VFQFN Exposed Pad package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
SN74LV373ARGYR Applications
There are a lot of Texas Instruments SN74LV373ARGYR Latches applications.
- Audio and video switching
- Bus system register with enable parallel lines at bus side
- Shift right register
- Serial Input
- Stacked or Push-Down Registers
- Counter timers
- Double bus register system
- Buffer Storage
- Motor Drives
- Relay