banner_page

SN74LV373ATDB

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV373ATDB
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 212
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74LV
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74LV373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 3.3V
Load Capacitance 50pF
Number of Ports 2
Output Current 16mA
Number of Bits 8
Propagation Delay 9.5 ns
Turn On Delay Time 1 ns
Family LV/LV-A/LVX/H
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 16mA 16mA
Logic Type D-Type Transparent Latch
Number of Input Lines 8
Independent Circuits 1
Height Seated (Max) 2mm
Length 7.2mm
Width 5.3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

SN74LV373ATDB Overview


The 20-SSOP (0.209, 5.30mm Width) package contains it. Tube is the way it is packaged. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 2V~5.5V. There is -40°C~85°C operating temperature. It is a type of FPGA belonging to the 74LV series. This electronic part is designed with 8 Bits. This device has been designed with 20 terminations available. It belongs to 74LV373 family. It operates with a supply voltage of 5V. 20 pins are available on it. It is a member of the LV/LV-A/LVX/H family of electronic devices. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part can be found within the FF/Latches subcategory. There are 3.3V power supplies required for this machine to operate. It contains 8 input lines where electronic circuits are present. With 16mA, maximum design flexibility is ensured. For maximum efficiency, the supply voltage should be set to 5V.

SN74LV373ATDB Features


20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies

SN74LV373ATDB Applications


There are a lot of Texas Instruments SN74LV373ATDB Latches applications.

  • Parallel data storage
  • OC-48 communication systems
  • Communication systems
  • TV Set-top Boxes
  • Buffer Storage
  • Parallel Input
  • Address register
  • PCs and Notebooks
  • Parallel Output
  • Network Switches

Write a review

Note: HTML is not translated!
    Bad           Good