SN74LV373ATDWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV373ATDWG4 Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. 74LV is the series number of this FPGA. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. As a member of the 74LV373 family, it falls under that category. The supply voltage of the device is 5V. 20 pins are available on it. This electronic device belongs to the family of LV/LV-A/LVX/H. The 20 pins are designed into it. It is mounted according to the Surface Mount method. In this device, there are 2 ports. The part is in the FF/Latches subcategory. It operates from 3.3V power supplies. It consists of 8 input lines from which an electronic circuit can be built. With an output current of 16mA, it is highly flexible in terms of design. High efficiency requires a supply voltage of 5V.
SN74LV373ATDWG4 Features
20-SOIC (0.295, 7.50mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
SN74LV373ATDWG4 Applications
There are a lot of Texas Instruments SN74LV373ATDWG4 Latches applications.
- Up-Down Johnson
- A/D converters
- Timers
- Parallel-to-Serial Data Conversion
- Clocks
- Bus system register with enable parallel lines at bus side
- Buffer/Storage Registers
- Four-bit storage with output enable
- Pattern Generators
- Digital bus buffer
