SN74LV373ATDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV373ATDWR Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. The supply voltage of the device is 2V~5.5V. It operates at -40°C~85°C degrees Celsius. The 74LV series is associated with this FPGA. There are 8 bits in this electronic part. In this device, there are 20 terminations. The family 74LV373 includes it. A 5V voltage supply is required for operation. 20 pins are included. It is a member of the LV/LV-A/LVX/H family of electronic devices. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. A total of 3.3V power supplies are needed to run it. The reliability of this device makes it well suited to TR. As the output current is 16mA, the design flexibility is maximum. The supply voltage should be maintained at 5V for high efficiency. Input lines are generated as binary equivalents by 8 output lines. This object is composed of 1 elements. When the maximum power current (ICC) is supplied for its operation, it reaches 0.02mA.
SN74LV373ATDWR Features
20-SOIC (0.295, 7.50mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373ATDWR Applications
There are a lot of Texas Instruments SN74LV373ATDWR Latches applications.
- Four-bit storage with output enable
- Decade counting 7-segment decimal display
- Counting
- Up/down difference counting
- Buffer register
- Accumulator Registers
- Parallel data synchronization
- Timers
- Programmable binary
- Relay replacement
