banner_page

SN74LV373ATNSR

D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV373ATNSR
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 689
  • Description: D-Type, Latch 2V~5.5V 8 Bits Tri-State Latches 74LV Series 74LV373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Weight 266.712314mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74LV
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74LV373
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Number of Ports 2
Output Current 16mA
Number of Bits 8
Propagation Delay 9.5 ns
Quiescent Current 2μA
Turn On Delay Time 1 ns
Family LV/LV-A/LVX/H
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 16mA 16mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.02mA
Number of Input Lines 8
Independent Circuits 1
Translation N/A
Height 2mm
Length 12.6mm
Width 5.3mm
Thickness 1.95mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LV373ATNSR Overview


The 20-SOIC (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the packaging method. It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 2V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74LV series. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74LV373. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. It is a member of the LV/LV-A/LVX/H family of electronic devices. This board has 20 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.5V. A total of 3.3V power supplies are needed to run it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. It consists of 8 input lines from which an electronic circuit can be built. This device is well suited for TR based on its reliable performance. The output current of 16mA makes it feature maximum design flexibility. Without external influences, it consumes 2μA quiescent current. The maximal power current (ICC) supplied for its operation reaches 0.02mA.

SN74LV373ATNSR Features


20-SOIC (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies

SN74LV373ATNSR Applications


There are a lot of Texas Instruments SN74LV373ATNSR Latches applications.

  • Serial Output Register
  • Ring counter
  • Hammer Device Information
  • Digital bus buffer
  • Serial Input
  • Shift left with parallel loading
  • Decade counting 7-segment decimal display
  • Relay replacement
  • Counter
  • Display

Write a review

Note: HTML is not translated!
    Bad           Good