SN74LV373ATRGYR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Output Lines | 8 |
| Length | 4.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV373ATRGYR Overview
The 20-VFQFN Exposed Pad package contains it. Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. 74LV is the series number of this FPGA. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74LV373 family, it falls under that category. In order to function, the supply voltage should be set to 5V. With 20 pins, it is equipped. There is a device in this electronic family called LV/LV-A/LVX/H. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. The part is in the FF/Latches subcategory. There are 3.3V power supplies attached to it. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. It features maximum flexibility in design due to 16mA output current. In order to achieve high efficiency, the supply voltage should be kept at 5V. Input lines are converted into binary equivalents by 8 output lines. This element consists of 1.
SN74LV373ATRGYR Features
20-VFQFN Exposed Pad package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373ATRGYR Applications
There are a lot of Texas Instruments SN74LV373ATRGYR Latches applications.
- Relay replacement
- Shift right register
- Timers
- Registers
- Data acquisition
- Shift register
- Double bus register system
- Decade counting
- Address register
- Counting
