Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
D-Type |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LV374 |
Function |
Standard |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Non-Inverted |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Clock Frequency |
170MHz |
Propagation Delay |
19.3 ns |
Turn On Delay Time |
4.9 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Flip-Flop |
Current - Quiescent (Iq) |
20μA |
Output Characteristics |
3-STATE |
Current - Output High, Low |
16mA 16mA |
Max Propagation Delay @ V, Max CL |
10.1ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
2.9pF |
Number of Input Lines |
2 |
Count Direction |
UNIDIRECTIONAL |
Clock Edge Trigger Type |
Positive Edge |
Translation |
N/A |
Max Frequency@Nom-Sup |
50000000Hz |
Height |
1.2mm |
Length |
6.5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV374APWE4 Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tubepackage. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The supply voltage is set to 2V~5.5V. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74LVseries of FPGAs. Its output frequency should not exceed 170MHz Hz. In total, there are 1 elements. Despite external influences, it consumes 20μAof quiescent current. Currently, there are 20 terminations. If you search by 74LV374, you will find similar parts. A voltage of 2.5V is used as the power supply for this D latch. There is 2.9pF input capacitance for this T flip flop. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility is achieved through the use of 8 circuits. There are 3.3V power supplies attached to it. The D flip flop is embedded with 2ports. It offers maximum design flexibility with its output current of 16mA. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74LV374APWE4 Features
Tube package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374APWE4 Applications
There are a lot of Texas Instruments SN74LV374APWE4 Flip Flops applications.
- 2 – Bit synchronous counter
- Storage registers
- Digital electronics systems
- Counters
- Memory
- Safety Clamp
- Cold spare funcion
- Synchronous counter
- Shift registers
- Bounce elimination switch