Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74LV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Type |
D-Type |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LV374 |
Function |
Standard |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Non-Inverted |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
16mA |
Number of Bits |
8 |
Clock Frequency |
150MHz |
Propagation Delay |
19.3 ns |
Quiescent Current |
20μA |
Turn On Delay Time |
4.9 ns |
Family |
LV/LV-A/LVX/H |
Logic Function |
D-Type, Flip-Flop |
Current - Quiescent (Iq) |
2μA |
Output Characteristics |
3-STATE |
Current - Output High, Low |
16mA 16mA |
Max Propagation Delay @ V, Max CL |
10.1ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
4pF |
Number of Input Lines |
2 |
Count Direction |
UNIDIRECTIONAL |
Clock Edge Trigger Type |
Positive Edge |
Translation |
N/A |
Max Frequency@Nom-Sup |
50000000Hz |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LV374ATDWR Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74LVseries FPGA. You should not exceed 150MHzin the output frequency of the device. A total of 1elements are present in it. This process consumes 2μA quiescents. It has been determined that there have been 20 terminations. The 74LV374family includes it. It is powered by a voltage of 2.5V . There is 4pF input capacitance for this T flip flop. A device of this type belongs to the family of LV/LV-A/LVX/H. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. The design is based on 8bits. Vsup reaches its maximum value at 5.5V. Normal operation requires a supply voltage (Vsup) above 4.5V. 8 circuits are used to achieve its superior flexibility. A reliable performance of this D flip flop makes it well suited for use in TR. It runs on 3.3Vvolts of power. This D flip flop is equipped with 0 ports. With a current output of 16mA , it offers maximum design flexibility. It has 2lines. Despite external influences, it consumes 20μAof quiescent current.
SN74LV374ATDWR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATDWR Applications
There are a lot of Texas Instruments SN74LV374ATDWR Flip Flops applications.
- High Performance Logic for test systems
- Storage Registers
- Balanced 24 mA output drivers
- Communications
- Parallel data storage
- EMI reduction circuitry
- 2 – Bit synchronous counter
- Matched Rise and Fall
- Load Control
- Asynchronous counter