SN74LV374ATNSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 19.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV374ATNSR Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. The Tape & Reel (TR)package contains it. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74LVseries FPGA. This D flip flop should not have a frequency greater than 150MHz. A total of 1elements are present in it. T flip flop consumes 2μA quiescent energy. Currently, there are 20 terminations. If you search by 74LV374, you will find similar parts. A voltage of 2.5V is used to power it. Its input capacitance is 4pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Its superior flexibility is attributed to its use of 8 circuits. This D flip flop is well suited for TR based on its reliable performance. The D latch operates on 3.3V volts. The flip flop has 2embedded ports. With a current output of 16mA , it offers maximum design flexibility. It has 2lines.
SN74LV374ATNSR Features
Tape & Reel (TR) package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATNSR Applications
There are a lot of Texas Instruments SN74LV374ATNSR Flip Flops applications.
- Safety Clamp
- Single Up Count-Control Line
- Automotive
- Single Down Count-Control Line
- EMI reduction circuitry
- Balanced 24 mA output drivers
- QML qualified product
- Frequency Divider circuits
- Counters
- Asynchronous counter
