SN74LV374ATPW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 19.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV374ATPW Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). Package Tubeembeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74LV series. A frequency of 150MHzshould not be exceeded by its output. A total of 1elements are present in it. As a result, it consumes 2μA quiescent current and is not affected by external forces. The number of terminations is 20. Members of the 74LV374family make up this object. Power is supplied from a voltage of 2.5V volts. JK flip flop input capacitance is 4pF farads. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. This flip flop is designed with 8 Bits. As soon as 5.5Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. In order to achieve its superior flexibility, 8 circuits are used. An electrical current of 3.3V volts is applied to it. A D flip flop with 2embedded ports is available. As a result of its output current of 16mA, it is very flexible in terms of design. Currently, there are 2 input lines present.
SN74LV374ATPW Features
Tube package
74LV series
20 pins
8 Bits
3.3V power supplies
SN74LV374ATPW Applications
There are a lot of Texas Instruments SN74LV374ATPW Flip Flops applications.
- Buffered Clock
- Memory
- QML qualified product
- Storage registers
- Latch-up performance
- Circuit Design
- Storage Registers
- ESCC
- Digital electronics systems
- Divide a clock signal by 2 or 4
