SN74LV393ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 121.789551mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV393 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 16.5 ns |
| Trigger Type | Negative Edge |
| fmax-Min | 105 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 70MHz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV393ADBR Overview
The device is packaged in the 14-SSOP (0.209, 5.30mm Width)type. Using 14terminations, it can be configured. Having a supply voltage of 2.5V enables to operate in a fully flexible manner. In wires, 2elements are connected. 14is the number of pins on all components. It is packaged in the way of Cut Tape (CT). As part of the circuit, there are 14pins that connect other components. Surface Mountis the way in which it is mounted. In this case, it appears as a member of the LV/LV-A/LVX/H family. This device is a member of the 74LVseries and is well suited for a wide range of applications. It is assumed that the logic type is [0]. -40°C~85°Cshould be the operating temperature. Using a Surface Mountmounting type, it is mounted. As a result, the device operates more reliably when a supply voltage of 2V~5.5Vis applied. There are 4bits stored in each element of the array. The result may be yesin terms of Pbfree code. The base part number of 74LV393provides access to more related parts. Its packaging is provided by [0]. From the voltage source, there is a voltage of 3.3V volts. Supply voltages can be as low as 2V volts (Vsup). With a frequency of [0], it operates. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.5V volts.
SN74LV393ADBR Features
Embedded in the 14-SSOP (0.209, 5.30mm Width) package
4 bits per element
Frequency of 150MHz
SN74LV393ADBR Applications
There are a lot of Texas Instruments SN74LV393ADBR Counters & Dividers applications.
- Divide-by-N counting
- ANALOG SIGNAL PROCESSING
- Programmable decade counters
- Divide-by"N" counters/frequency synthesizers
- Clocks
- SQUARING
- Frequency dividers
- Fixed and programmable counters greater than 10
- LINEARIZATION
- Time Out Timer for Consumer-Application Industrial Controls
