banner_page

SN74LV393ADGVR

2 Element 2.5V CMOS DUAL Counters & Dividers 74LV Series 74LV393 14 Pins Up Negative Edge 14-TFSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LV393ADGVR
  • Package: 14-TFSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 722
  • Description: 2 Element 2.5V CMOS DUAL Counters & Dividers 74LV Series 74LV393 14 Pins Up Negative Edge 14-TFSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TFSOP (0.173, 4.40mm Width)
Number of Pins 14
Weight 41.787197mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74LV
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.5V
Frequency 150MHz
Base Part Number 74LV393
Pin Count 14
Number of Elements 2
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Propagation Delay 32 ns
Turn On Delay Time 32 ns
Reset Asynchronous
Family LV/LV-A/LVX/H
Logic Function Counter
Direction Up
Logic Type Binary Counter
Number of Bits per Element 4
Prop. Delay@Nom-Sup 16.5 ns
Trigger Type Negative Edge
fmax-Min 105 MHz
Clock Edge Trigger Type Negative Edge
Count Rate 70MHz
Height 1.2mm
Length 3.6mm
Width 4.4mm
Thickness 1.05mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LV393ADGVR Overview


A 14-TFSOP (0.173, 4.40mm Width)package is used for this device. In order to configure it, it uses 14terminations. Having a supply voltage of 2.5V enables to operate in a fully flexible manner. An interconnection of 2elements is provided by wires. In total, there are 14pins on the component. It is packaged in a manner consistent with Cut Tape (CT). As part of the circuit, there are 14pins used to connect other components. The way of Surface Mount is used to mount it. The LV/LV-A/LVX/Hfamily includes it. Having been designed as a member of the 74LVseries, it is well suited for use in a wide range of applications. Binary Counteris used as the logic type. Ideally, the operating temperature should be set to -40°C~85°C. There is a mounting type of Surface Mounton this device. In the case of a supply voltage of [0], it operates more reliably. There are 4 bits stored in each element of the array. Pbfree code may result in yes. Further related parts can be found under its base part number 74LV393. It is packed by [0]. The voltage source generates 3.3Vvoltage. Supply voltages can be as low as 2V volts (Vsup). A frequency of 150MHzis used for operation. Typically, the supply voltage (Vsup) is limited to 5.5V.

SN74LV393ADGVR Features


Embedded in the 14-TFSOP (0.173, 4.40mm Width) package
4 bits per element
Frequency of 150MHz

SN74LV393ADGVR Applications


There are a lot of Texas Instruments SN74LV393ADGVR Counters & Dividers applications.

  • Communications Digital Frequency Synthesizers;
  • Decade counter/decimal decode display (CD4017B)
  • ANALOG SIGNAL PROCESSING
  • Dual Up Counters
  • LINEARIZATION
  • Timing applications
  • MULTIPLICATION
  • Control counters
  • Signal gating
  • Frequency dividers

Write a review

Note: HTML is not translated!
    Bad           Good