SN74LV393ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Frequency | 150MHz |
| Base Part Number | 74LV393 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 16.5 ns |
| Trigger Type | Negative Edge |
| fmax-Min | 105 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 70MHz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV393ADR Overview
It is a device supplied in the 14-SOIC (0.154, 3.90mm Width) package. For its configuration, 14terminations are used. 2.5Vis enabled to operate in an extremely flexible manner due to its supply voltage. In this diagram, there are 2elements that are interconnected by wires. The number of all component pins is 14. As a result, it is packaged in the way of a Cut Tape (CT). In the circuit, there are 14pins that connect other parts. It is mounted in the manner of [0]. It is included in the LV/LV-A/LVX/Hfamily. Due to the fact that it is a member of the 74LVseries, it has a wide range of applications. It is assumed that the logic type is [0]. -40°C~85°Cshould be the operating temperature. In this case, it is mounted with a Surface Mounttype. Providing a supply voltage of 2V~5.5Vallows it to operate more reliably. There are 4bits stored in each element of the array. Using the Pbfree code, the result may be yes. Further related parts may be found under the base part number 74LV393. TR is employed for its packing. The voltage source produces a voltage of 3.3V volts. The minimum supply voltage (Vsup) is 2V. With a frequency of [0], it operates. Up to 5.5Vis the maximum supply voltage (Vsup).
SN74LV393ADR Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
Frequency of 150MHz
SN74LV393ADR Applications
There are a lot of Texas Instruments SN74LV393ADR Counters & Dividers applications.
- Timing applications
- MULTIPLICATION
- Counter control/timers
- VHF, UHF, FM, AM, etc.
- Divide-by-N counting
- Divide-by"N" counters/frequency synthesizers
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed and programmable counters greater than 10
- LINEARIZATION
- ALGEBRAIC COMPUTATION
