SN74LV393APWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Unidirectional |
| Max I(ol) | 0.006 A |
| fmax-Min | 105 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV393APWG4 Overview
The device is packaged in the TSSOPtype. This configuration uses 14terminations. The supply voltage of 2.5V enables it operate in a fully flexible way. 2 elements are interconnected in wires. All component pins are equal to 14. As part of the circuit, there are 14pins used to connect other components. It is mounted using the way of [0]. In this case, it emerges as a member of the LV/LV-A/LVX/H family. The device stores 4bits of information. Based on Pbfree code, this may result in yes. It is manufactured in the temperature grade INDUSTRIAL. For its packaging, TUBEis employed. The voltage source generates 3.3Vvoltage. The device operates at 85°Cfor extended periods with acceptable stability of electrical characteristics. It operates over a specified temperature range with a lower limit generally set to -40°C. Frequency 150MHzdetermines its operation. The maximum voltage that can be applied to the device is 5.5V. It is possible to operate the device at as low a voltage as 2V.
SN74LV393APWG4 Features
Embedded in the TSSOP package
Frequency of 150MHz
SN74LV393APWG4 Applications
There are a lot of Texas Instruments SN74LV393APWG4 Counters & Dividers applications.
- Frequency dividing circuits
- Up Counters
- counting/frequency sy nthesizers-BCD output
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Digital multiplexing and demultiplexing
- Fixed and programmable counters greater than 10
- ALGEBRAIC COMPUTATION
- Programmable binary and decade
- VHF, UHF, FM, AM, etc.
- Counter control/timers
