SN74LV393APWR
| Parameters | |
|---|---|
| Turn On Delay Time | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 16.5 ns |
| Trigger Type | Negative Edge |
| fmax-Min | 105 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 70MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Frequency | 150MHz |
| Base Part Number | 74LV393 |
| Pin Count | 14 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 32 ns |
SN74LV393APWR Overview
A device of this type is supplied in a package of type [0]. In order to configure it, it uses 14terminations. Having a voltage supply of 2.5Vallows it to operate in a highly flexible manner. The device has 2terminations. 14is the number of pins on all components. Packaging is based on Cut Tape (CT). Circuit components are connected with 14pins. Using [0], it can be mounted. It emerges as a member of LV/LV-A/LVX/H family. Due to the fact that it is a member of the 74LVseries, it has a wide range of applications. The logic type of Binary Counter is adopted. -40°C~85°Cis the recommended operating temperature. The mounting type is Surface Mount. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It contains 4elements. Based on the Pbfree code, the result may be yes. Among its base part number [0], you will find additional parts that are related. In order to package it, TRis employed. Voltage from the voltage source is [0]. As low as 2V Vsup is the minimum supply voltage. The frequency of the device is 150MHz. It is possible to provide a voltage up to 5.5V (Vsup).
SN74LV393APWR Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Frequency of 150MHz
SN74LV393APWR Applications
There are a lot of Texas Instruments SN74LV393APWR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- POWER COMPUTATION
- Programmable binary and decade
- MULTIPLICATION
- Binary counter/decoder
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time-delay circuits
- LINEARIZATION
- Timing applications
- ANALOG SIGNAL PROCESSING
