SN74LV393ATPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV393 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 16.5 ns |
| Trigger Type | Negative Edge |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 70MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV393ATPWREP Overview
A 14-TSSOP (0.173, 4.40mm Width)package is used for this device. For its configuration, 14terminations are used. Having a supply voltage of 2.5V enables to operate in a fully flexible manner. A wire connects the 2elements. The number of all component pins is 14. As a result, it is packaged in the way of a Tape & Reel (TR). As part of the circuit, there are 14pins used to connect other components. It is mounted in the way of [0]. It emerges as a member of LV/LV-A/LVX/H family. With its 74LVseries designation, it can be used for a range of applications. In this case, the logic type is set to [0]. It is recommended to set the operating temperature to -40°C~105°C. Having a mounting type of [0], it is suitable for installation. Providing a supply voltage of 2V~5.5Vallows it to operate more reliably. There are 4bits stored in each element of the array. Based on the Pbfree code, the result may be yes. There are more related parts under the 74LV393base part number. In order to package it, TRis employed. As a result of the voltage source, there is 3.3V voltage. There is 2V minimum supply voltage (Vsup) for this device. There is 150MHz frequency associated with it. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.5V volts.
SN74LV393ATPWREP Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
Frequency of 150MHz
SN74LV393ATPWREP Applications
There are a lot of Texas Instruments SN74LV393ATPWREP Counters & Dividers applications.
- ALGEBRAIC COMPUTATION
- TRUE RMS-TO-DC CONVERSION
- Binary counter/decoder
- Time Out Timer for Consumer-Application Industrial Controls
- Programmable decade counters
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time delay circuits
- Frequency dividing circuits
- Divide-by-N counting
- Signal gating
