SN74LV393ATPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV393 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 16.5 ns |
| Trigger Type | Negative Edge |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 35000000Hz |
| Count Rate | 70MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV393ATPWRG4Q1 Overview
This is a device supplied in the 14-TSSOP (0.173, 4.40mm Width) package. For its configuration, 16terminations are used. 2.5Vis enabled to operate in an extremely flexible manner due to its supply voltage. The device contains 2terminations. There are a total of 16 pins in all components. As a result, it is packaged in the way of a Tape & Reel (TR). In the circuit, 14pins are used to connect other components. It is mounted in the manner of [0]. In this case, it appears as a member of the family [0]. As a member of the Automotive, AEC-Q100, 74LVseries, it is ideal for a wide range of applications. Logic type Binary Counter is adopted. Setting the operating temperature to -40°C~105°C is recommended. Using a Surface Mountmounting type, it is mounted. As a result, the device operates more reliably when a supply voltage of 2V~5.5Vis applied. The array has 4elements. It is possible for the result to be yesin Pbfree code. More related parts are available under its base part number 74LV393. For its packaging, TRis employed. In this case, 3.3Vvoltage is generated by the voltage source. Supply voltage (Vsup) can be as low as 2V. The maximum supply voltage (Vsup) is up to 5.5V.
SN74LV393ATPWRG4Q1 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
SN74LV393ATPWRG4Q1 Applications
There are a lot of Texas Instruments SN74LV393ATPWRG4Q1 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- MULTIPLICATION
- Fixed and programmable counters greater than 10
- Digital multiplexing and demultiplexing
- Frequency division
- Frequency dividers
- counting/frequency sy nthesizers-BCD output
- SQUARE ROOT
- Time delay circuits
- Control counters
