SN74LV393ATPWRQ1
| Parameters | |
|---|---|
| Max Frequency@Nom-Sup | 35000000Hz |
| Count Rate | 70MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 56.812444mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV393 |
| Pin Count | 16 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 16.5 ns |
| Trigger Type | Negative Edge |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Negative Edge |
SN74LV393ATPWRQ1 Overview
This device is packaged in a 14-TSSOP (0.173, 4.40mm Width) package. In order to configure it, it uses 16terminations. The supply voltage of 2.5V enables it operate in a fully flexible way. In wires, 2elements are connected. The total number of component pins is 16. It is packaged in a manner consistent with Tape & Reel (TR). In the circuit, there are 14pins that connect other components. It is mounted in the manner of [0]. In this case, it belongs to the family of [0]. Having been designed as a member of the Automotive, AEC-Q100, 74LVseries, it is well suited to a variety of applications. A logic type of Binary Counter is adopted. -40°C~105°Cis the recommended operating temperature. There is a mounting type of Surface Mounton this device. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. There are 4bits stored in each element of the array. Based on the Pbfree code, the result may be yes. Its base part number, [0], contains more related parts. In order to pack the product, TRis employed. From the voltage source, there is 3.3Vvoltage. Supply voltages can be as low as 2V volts (Vsup). It is possible to reach a maximum supply voltage of 5.5VV (Vsup).
SN74LV393ATPWRQ1 Features
Embedded in the 14-TSSOP (0.173, 4.40mm Width) package
4 bits per element
SN74LV393ATPWRQ1 Applications
There are a lot of Texas Instruments SN74LV393ATPWRQ1 Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Analog multiplexing and demultiplexing
- Time Out Timer for Consumer-Application Industrial Controls
- SQUARE ROOT
- Divide-by-N counting
- Dual Up Counters
- Binary counter/decoder
- DIVISION
- Frequency dividers
- Time delay circuits
