SN74LV4040ADRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 185MHz |
| Base Part Number | 74LV4040 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 28 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 95MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV4040ADRG4 Overview
In the 16-SOIC (0.154, 3.90mm Width)package, it is supplied. The configuration of this device is based on 16terminations. With a supply voltage of 2.5V volts, it is possible to run it in a fully flexible manner. In wires, 1elements are connected. The number of all component pins is 16. It is packaged in the way of Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. Using [0], it can be mounted. In this case, it emerges as a member of the LV/LV-A/LVX/H family. Due to the fact that it is a member of the 74LVseries, it has a wide range of applications. Binary Counteris used as the logic type. Setting the operating temperature to -40°C~85°C is recommended. This device is mounted in the Surface Mountposition. When a supply voltage of 2V~5.5Vis provided, it can operate with greater reliability. There are 12bits stored in each element of the array. The base part number of 74LV4040provides access to more related parts. For its packaging, TAPE AND REELis employed. In this case, 3.3Vvoltage is generated by the voltage source. As low as 2V Vsup is the minimum supply voltage. A frequency of 185MHzis used for operation. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.5V volts.
SN74LV4040ADRG4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
12 bits per element
Frequency of 185MHz
SN74LV4040ADRG4 Applications
There are a lot of Texas Instruments SN74LV4040ADRG4 Counters & Dividers applications.
- Binary counter/decoder
- SQUARE ROOT
- Timers
- Time Out Timer for Consumer-Application Industrial Controls
- Control counters
- Fixed or Programmable Frequency Division
- Divide-by"N" counters/frequency synthesizers
- DIVISION
- Timing applications
- Frequency dividers
