SN74LV4040AMPWREP
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV4040 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 28 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.02mA |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 40000000Hz |
| Count Rate | 95MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
SN74LV4040AMPWREP Overview
A 16-TSSOP (0.173, 4.40mm Width)package is used for this device. It is configured using 16terminations. Having a voltage supply of 2.5Vallows it to operate in a highly flexible manner. There are wires connecting 1elements. The number of all component pins is 16. As a result, it is packaged in the way of a Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. Using [0], it can be mounted. The LV/LV-A/LVX/Hfamily is derived from it. Due to the fact that it is a member of the 74LVseries, it has a wide range of applications. In this case, the logic type is set to [0]. In this case, the operating temperature should be set to -55°C~125°C. Mounting type Surface Mountis used. In the presence of the supply voltage of [0], it can operate more reliably. There are 12bits stored in each element of the array. Based on the Pbfree code, the result may be yes. There are more related parts under the 74LV4040base part number. It is packed by [0]. As a result of the voltage source, there is 3.3V voltage. Supply voltage (Vsup) can be as low as 2V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.5V volts.
SN74LV4040AMPWREP Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
12 bits per element
SN74LV4040AMPWREP Applications
There are a lot of Texas Instruments SN74LV4040AMPWREP Counters & Dividers applications.
- Signal gating
- DIVISION
- SQUARING
- Binary counter/decoder
- Frequency dividers
- Programmable binary and decade
- SQUARE ROOT
- ALGEBRAIC COMPUTATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- VHF, UHF, FM, AM, etc.
