SN74LV4040ANSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 185MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4040 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.02mA |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 95MHz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV4040ANSR Overview
A 16-SOIC (0.209, 5.30mm Width)package is used for this device. There are 16terminations used for configuring it. This device is fully flexible due to the supply voltage of [0]. The device contains 1terminations. There are 16pins on all components. It is packaged in the way of Tape & Reel (TR). A circuit is connected to other components by 16pins. The Surface Mountway is used to mount it. It is included in the LV/LV-A/LVX/Hfamily. Due to the fact that it is a member of the 74LVseries, it has a wide range of applications. The logic type of Binary Counter is adopted. The operating temperature should be set at -40°C~85°C. It adopts a mounting type of Surface Mount. As a result, the device operates more reliably when a supply voltage of 2V~5.5Vis applied. The array stores 12bits in each element. Pbfree code may result in yes. Under its base part number of [0], you will find additional related parts. TR is employed for its packing. As a result of the voltage source, there is 3.3V voltage. As low as 2V Vsup is the minimum supply voltage. With a frequency of [0], it operates. The maximum supply voltage (Vsup) is up to 5.5V.
SN74LV4040ANSR Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
12 bits per element
Frequency of 185MHz
SN74LV4040ANSR Applications
There are a lot of Texas Instruments SN74LV4040ANSR Counters & Dividers applications.
- Communications Digital Frequency Synthesizers;
- Clocks
- VHF, UHF, FM, AM, etc.
- Frequency division
- Programmable decade counters
- Time Out Timer for Consumer-Application Industrial Controls
- POWER COMPUTATION
- SQUARE ROOT
- Control counters
- Divide-by-N counting
