SN74LV4040APWRE4
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Frequency | 185MHz |
| Pin Count | 16 |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 12 |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 28 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.006 A |
| Sync/Async | Asynchronous |
| Clock Edge Trigger Type | Negative Edge |
| Load/Preset Input | NO |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
SN74LV4040APWRE4 Overview
This device is supplied in the TSSOP package. It is configured using 16terminations. Having a supply voltage of 2.5V enables to operate in a fully flexible manner. An interconnection of 1elements is provided by wires. In all, there are 16 pins on each component. There is a package in the form of Tape & Reel (TR). Circuit components are connected by 16pins. Using [0], it can be mounted. The LV/LV-A/LVX/Hfamily is derived from it. There is information in the device in the form of 12bits. It is possible for the result to be yesin Pbfree code. The temperature grade of this device is INDUSTRIAL. In order to pack the product, TAPE AND REELis employed. As a result of the voltage source, there is 3.3V voltage. Electrical characteristics are acceptable at extended periods of time at temperatures above [0]. It operates over a specified temperature range with a lower limit generally set to -40°C. It operates with the frequency of 185MHz. There is a maximum voltage available for the device of 5.5V. As low as 2Vis the minimum voltage that can be applied to the device.
SN74LV4040APWRE4 Features
Embedded in the TSSOP package
Frequency of 185MHz
SN74LV4040APWRE4 Applications
There are a lot of Texas Instruments SN74LV4040APWRE4 Counters & Dividers applications.
- Communications Digital Frequency Synthesizers;
- POWER COMPUTATION
- Programmable binary and decade
- Decade counter/decimal decode display (CD4017B）
- ANALOG SIGNAL PROCESSING
- Control counters
- Fixed or Programmable Frequency Division
- Timing applications
- Frequency dividers
- MULTIPLICATION
