SN74LV4051ANSR
| Parameters | |
|---|---|
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4051 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 20μA |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 28 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 28 ns |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 45 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.5pF 23.4pF |
| On-state Resistance Match-Nom | 2.1Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
SN74LV4051ANSR Overview
Presented in 16-SOIC (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. By its 8 channels, the electronic component provides high-quality output. A 2.3V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 16 pins. Circuits number 1 make up this analogue multiplexer. 74LV4051 can be used to search for analog multiplexer variants. It has an internal resistance of 75Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 20μA current would suffice. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. A 8 input needs to be operated. There are various bandwidths available for data transfer.
SN74LV4051ANSR Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
SN74LV4051ANSR Applications
There are a lot of Texas Instruments SN74LV4051ANSR Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Automatic test equipment
- Automotive applications
- Microwave transmission systems
- Remote Powered Equipment
- FTTH
- DSLAMs
- Cross Connects
- Multi-Line E1 Interface Cards
- Switching Systems
